C8U C8B Industrial Lowara Pump Seal 14mm Multi Spring Seals Clone Alternative

C8U C8B Industrial Lowara Pump Seal 14mm Multi Spring Seals Clone Alternative​

BGM C8U SERIES MECHANICAL SEAL

1. Model Explaination:
BGM C8U series are single face unbalanced multi springs mechanical seal,in agreement with DIN24960/L1K specification,auxiliary seal adopt PTFE or rubber O-ring.Good interchangeability,wide application range.
BGM C8U series, on difference of rotating ring structure and auxiliary seal,are divided into model BGM C8U,BGM C8B as below:
Model BGM C8U is BGM C8B basic series with rubber O-ring;
Model KL8UV is with "v" type seal;

2. Material Combination:
Rotating ring: Silicon carbide,Graphite,Tungsten carbide
Stationary ring: Silicon carbide,Tungsten carbide
Spring: 1Cr18Ni9Ti,316L
Structure: 1Cr18Ni9Ti,316L
Auxiliary seal: PTFE,rubber O-ring

3. Operating Parameters:
Specification: 14-100mm
Pressure: 0-1.5mpa
Temperature: -40ºC-220ºC
Speed: ≤25m/s

4. Features:
Complies with DIN24960/L1K
For plain shaft
Certificate: ISO9001
Adaptation to dimensions given by customer requirement
Qood quality and competitive price

5. Applications:
Chemical pump
Oil pump
water and waste water technology
Pulp and paper industry
Sugar industry
Industrial pump

We are a manufacturer. All seals have bulk inventory and can be shipped to you quickly. We promise to ship you in small quantities within 3 days.

1. Different models of mechanicals seals for a wide variety of Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc. Available in diverse combinations of materials and different diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for Sarlin®. Division of waster pumps. Available in various materials: silicon-graphite carbide, silicon carbide-silicon carbide; combined with EPDM and FKM elastomers.

2. Mechanical seals are available for different references Gorman-Rupp® pumps. Special models for the transfer of clean water, sewage, oil industry, agriculture and others.
GRN-38'1

3. Mechanical seals for Fristam® pumps. Wide range of models and materials in the most standard diameters: 22,30 and 35 mm. Different assembly possibilities for the most well-known pump models: FP, FL and FT.

4. Broad range of mechanical seals compatible with Flygt® and Grindex® waste water pumps. These mechanical seals are characterized by their easy and fast installation, without having to make any modification to the pump. Manufactured in stainless steel and in solid tungsten carbide. Special tools are not necessary for their installation.

5. Mechanical seals for EMU® pumps. They get two static faces and one rotating face. We can supply the complete seal or spare faces.

6. Different designs of mechanical seals for Ebara® pumps, single and double seals in combinations carbide-silicon carbide and graphite-aluminium oxide.

7. Mechanical seals for all types of Calpeda® pumps: centrifugal pumps, multistage, submersible. Different models of mechanical seals in a wide range of materials.

8. Mechanical seals compatible for APV® pumps, among them: Puma, ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista® and Pasilac®, W and W+. Some designs with wave spring like the special seals for APV Howard® pumps and Crepaco Clean Line®. All of them have been manufactured in materials suitable for working with fluids such as juices, milk and drinks in general.

9. Allweiler, Simple design of mechanical seals simple but with special measures for this type of pump.

10. Different models of mechanical seals compatible for Alfa-Laval® pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the range of lobular SSP and SR pumps. Mechanical seals in different combination of materials tungsten carbide, silicon carbide, graphite; combined with different types of elastomers: NBR, EPDM and FKM.

Factory panorama Production site Finished product inventory Exhibitors in the exhibition Bulk spot

Fixing and Applying Directions of Mechanical Seals

1. Select Appropriate mechanical seal to match the materials according to work conditions and host machine equipment.
2. The radial acting deviation for the shaft(shaft sleeve) of the installed mechanical seal shall be 0.04mm by maximum
while the axial movement value of the rotor shall be no more than 0.1mm.
3. The seal cover (or shaft cover) of the stationary ring of the installed mechanical seals,the vertical degree of the seal
face should be 0.04mm by maximum.
4. When installing the mechanical seals,the shaft(shaft sleeve),seal chamber,seal face as well as the mechanical seal
must be cleaned in order to keep from any medium to sealing part.
5. When conveying medium of over high or low temperature,with medium which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take appropriate measures such as quench,rinsing,coolong and
filtrating.